SAMPLE MATERIAL SAFETY DATA SHEET
for Typical Black Toner Powder

Note: Whilst the detailed specification of each toner powder will vary, this data sheet shows a typical specification

1. Product

Black Toner Powder

2. Composition / information on ingredients

Styrene acrylic copolymer: CAS No: 27136-15-8 Weight %: 50-100
Iron oxide: CAS No: 1309-38-2 Weight %: 25-50
Polypropylene: CAS No: 9003-07-0 Weight %: 1-5
Dye stuff: Weight %: 1-5

5. Fire fighting measures

Flash point ( degrees C): N. A. (=Not Applicable)
Explosion limits (dust explosion): LEL U (= unknown) UEL U
Ignition temperature (degrees C): U
Extinguishing media: Dry chemical, carbon dioxide, water spray (fog), foam.
Special fire fighting precautions: N. A.
Hazardous products of decomposition: N. A.

6. Accidental release measures

Spills can be cleaned with a vacuum cleaner or a damp rag. Do not use warm water, because this makes the powder soft and sticky.

7. Handling and storage

Keep bottle tightly closed to prevent dust formation. Handle carefully. Avoid breathing dust. No special technical measures for storage.

10. Stability and reactivity

Thermal decomposition: Above approx. 450 degrees C
Hazardous decomposition products: None at intended use
Hazardous reaction: None

11. Toxicological information

Inhalation: * At high concentration in air the powder may cause discomfort of upper respiratory system.
Skin: * No adverse health effects are expected.
Eyes: * Dust may cause discomfort in the same manner as nuisance dust.
Ingestion: * Considered relatively harmless.
Mutagenicity: None of the ingredients is listed as mutagenic or carcinogenic.

* These statements are based on toxicological literature on the ingredients of this product and test results of similar products.

14. Transport information

This product is not classified as a dangerous substance according to the international transport regulations.

15. Regulatory information

This product is not classified as a dangerous preparation according to the European Directives 67/548/EEC and 88/379/EEC for the classification, packaging and labelling of dangerous substances and preparations. Therefore, indications of special risks or safety advice on the packing are not prescribed for this product.

16. Other information

Use: ink powder for copiers, laser printers and fax machines.
Room ventilation: see operator manual or safety data sheet for the copier.
Modification: none.

This safety data sheet has been compiled to the best of our knowledge as a compact guide to safe handling of this product. We reserve the right to revise safety data sheets as new information becomes available. It is the user's responsibility to determine the suitability of this information for the adoption of safety precautions as may be necessary and to contact the company to make sure that this sheet is the latest one issued. If and in so far as limitation of liability is permitted under the applicable laws, we do not accept liability for any inaccuracy that may occur in this information.

3. Hazards identification

In a toner dust cloud the formation of an explosive dust-air mixture is possible.
Toner dust may cause discomfort for the eyes and respiratory tract, in the same manner as inert nuisance dust.
To our knowledge, with due observance of the recommended exposure limit and of normal hygiene this product presents no health hazard in normal use.

4. First aid measures

Eyes contact: Rinse with plenty of water.
Skin contact: Wash with cold water and soap.
Inhalation: Clean nose, mouth, throat. Cough up. Fresh air.
Ingestion: Rinse mouth with water. If large quantity swallowed seek medical advice.

For any medical advice take along this material safety data sheet.

8. Exposure controls / personal protection

No special technical measures. No personal protective equipment needed.
Industrial hygiene: after skin

contact wash with cold water and soap.
Threshold Limit Value for nuisance dust: 10 mg/m

9. Physical and chemical properties

Appearance and odour: Black powder, faint odour.
Boiling point (degrees C): N. A.
Bulk density (kg/m 3 ): Approx. 600
Vapour density (air = 1): N. A.
Softening point ( degrees C): Approx. 60
Solubility in water: Insoluble.
Evaporation rate (butyl acetate = 1): N. A.
Vapour pressure: N. A.
% Volatile: 0 <
Other characteristics: N. A.
pH (solution): N. A.

12. Ecological information

This product is not biodegradable. No adverse environmental effects are expected.

13. Disposal considerations

Pack waste dust proof to prevent dusting. With due observance of local laws and regulations, dispose of by burial in a sanitary landfill or incineration. Do not throw in open fire, in order to prevent the risk of a dust explosion.